add next infos

Signed-off-by: GnomeZworc <nicolas.boufidjeline@g3e.fr>

README.md

@@ -27,4 +27,6 @@ ebtables -A FORWARD -p arp --arp-op Request --arp-ip-dst 240.0.0.1 -j DROP
 ebtables -L --Lc
 
 genisoimage -output seed.iso -volid cidata -joliet -rock meta-data user-data network-config
+
+socat -,raw,echo=0 unix-connect:/tmp/vm-monitor.sock
 ```

frr/daemons

@@ -0,0 +1,126 @@
+# This file tells the frr package which daemons to start.
+#
+# Sample configurations for these daemons can be found in
+# /usr/share/doc/frr/examples/.
+#
+# ATTENTION:
+#
+# When activating a daemon for the first time, a config file, even if it is
+# empty, has to be present *and* be owned by the user and group "frr", else
+# the daemon will not be started by /etc/init.d/frr. The permissions should
+# be u=rw,g=r,o=.
+# When using "vtysh" such a config file is also needed. It should be owned by
+# group "frrvty" and set to ug=rw,o= though. Check /etc/pam.d/frr, too.
+#
+# The watchfrr, zebra and staticd daemons are always started.
+#
+bgpd=yes
+ospfd=no
+ospf6d=no
+ripd=no
+ripngd=no
+isisd=no
+pimd=no
+pim6d=no
+ldpd=no
+nhrpd=no
+eigrpd=no
+babeld=no
+sharpd=no
+pbrd=no
+bfdd=no
+fabricd=no
+vrrpd=no
+pathd=no
+
+#
+# If this option is set the /etc/init.d/frr script automatically loads
+# the config via "vtysh -b" when the servers are started.
+# Check /etc/pam.d/frr if you intend to use "vtysh"!
+#
+vtysh_enable=yes
+zebra_options="  -A 127.0.0.1 -s 90000000"
+mgmtd_options="  -A 127.0.0.1"
+bgpd_options="   -A 127.0.0.1"
+ospfd_options="  -A 127.0.0.1"
+ospf6d_options=" -A ::1"
+ripd_options="   -A 127.0.0.1"
+ripngd_options=" -A ::1"
+isisd_options="  -A 127.0.0.1"
+pimd_options="   -A 127.0.0.1"
+pim6d_options="  -A ::1"
+ldpd_options="   -A 127.0.0.1"
+nhrpd_options="  -A 127.0.0.1"
+eigrpd_options=" -A 127.0.0.1"
+babeld_options=" -A 127.0.0.1"
+sharpd_options=" -A 127.0.0.1"
+pbrd_options="   -A 127.0.0.1"
+staticd_options="-A 127.0.0.1"
+bfdd_options="   -A 127.0.0.1"
+fabricd_options="-A 127.0.0.1"
+vrrpd_options="  -A 127.0.0.1"
+pathd_options="  -A 127.0.0.1"
+
+
+# If you want to pass a common option to all daemons, you can use the
+# "frr_global_options" variable.
+#
+#frr_global_options=""
+
+
+# The list of daemons to watch is automatically generated by the init script.
+# This variable can be used to pass options to watchfrr that will be passed
+# prior to the daemon list.
+#
+# To make watchfrr create/join the specified netns, add the the "--netns"
+# option here. It will only have an effect in /etc/frr/<somename>/daemons, and
+# you need to start FRR with "/usr/lib/frr/frrinit.sh start <somename>".
+#
+#watchfrr_options=""
+
+
+# configuration profile
+#
+#frr_profile="traditional"
+#frr_profile="datacenter"
+
+
+# This is the maximum number of FD's that will be available.  Upon startup this
+# is read by the control files and ulimit is called.  Uncomment and use a
+# reasonable value for your setup if you are expecting a large number of peers
+# in say BGP.
+#
+#MAX_FDS=1024
+
+# Uncomment this option if you want to run FRR as a non-root user. Note that
+# you should know what you are doing since most of the daemons need root
+# to work. This could be useful if you want to run FRR in a container
+# for instance.
+# FRR_NO_ROOT="yes"
+
+# For any daemon, you can specify a "wrap" command to start instead of starting
+# the daemon directly. This will simply be prepended to the daemon invocation.
+# These variables have the form daemon_wrap, where 'daemon' is the name of the
+# daemon (the same pattern as the daemon_options variables).
+#
+# Note that when daemons are started, they are told to daemonize with the `-d`
+# option. This has several implications. For one, the init script expects that
+# when it invokes a daemon, the invocation returns immediately. If you add a
+# wrap command here, it must comply with this expectation and daemonize as
+# well, or the init script will never return. Furthermore, because daemons are
+# themselves daemonized with -d, you must ensure that your wrapper command is
+# capable of following child processes after a fork() if you need it to do so.
+#
+# If your desired wrapper does not support daemonization, you can wrap it with
+# a utility program that daemonizes programs, such as 'daemonize'. An example
+# of this might look like:
+#
+# bgpd_wrap="/usr/bin/daemonize /usr/bin/mywrapper"
+#
+# This is particularly useful for programs which record processes but lack
+# daemonization options, such as perf and rr.
+#
+# If you wish to wrap all daemons in the same way, you may set the "all_wrap"
+# variable.
+#
+#all_wrap=""

frr/local/frr.conf

@@ -0,0 +1,25 @@
+# default to using syslog. /etc/rsyslog.d/45-frr.conf places the log in
+# /var/log/frr/frr.log
+#
+# Note:
+# FRR's configuration shell, vtysh, dynamically edits the live, in-memory
+# configuration while FRR is running. When instructed, vtysh will persist the
+# live configuration to this file, overwriting its contents. If you want to
+# avoid this, you can edit this file manually before starting FRR, or instruct
+# vtysh to write configuration to a different file.
+log syslog informational
+router bgp 65000
+  bgp router-id 192.168.14.103
+  no bgp default ipv4-unicast
+  neighbor fabric peer-group
+  neighbor fabric remote-as 65000
+  neighbor fabric capability extended-nexthop
+  ! BGP sessions with route reflectors
+  neighbor 192.168.14.100 peer-group fabric
+  !
+  address-family l2vpn evpn
+   neighbor fabric activate
+   advertise-all-vni
+  exit-address-family
+  !
+!

seed/user-data

@@ -6,3 +6,5 @@ users:
     doas: [permit nopass nicolas]
     ssh_authorized_keys:
       - ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIDNxP6+vpKgqLfQ4aA90MezAkqgBtwXYWnhNQznXH6bU root@lab3
+ssh_authorized_keys:
+  - ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIDNxP6+vpKgqLfQ4aA90MezAkqgBtwXYWnhNQznXH6bU root@lab3